AP2011SL-13
| Parameters | |
|---|---|
| Supplier Device Package | 14-SOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | AP2011 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Current | 8mA |
| Nominal Supply Current | 8mA |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 10V~40V |
| Control Features | Enable, Phase Control, Soft Start |
| Topology | Buck |
| Frequency - Switching | 200kHz |
| Synchronous Rectifier | Yes |
| Max Duty Cycle | 85 % |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
AP2011SL-13 Overview
The switching controller fits in the 14-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. A total of Transistor Driver dc switching's outputs can be handled by it. 10V~40V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. It can switch at 200kHz. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Phase Control, Soft Start. In addition to "AP2011", there are other relevant dc to dc converter ics you can find. 14 pins are on switching converter. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 85 % during power-up and power-down. DC regulator should be kept at a temperature of -40°C or higher. DC regulator should run at a temperature of 85°C more than 85°C degrees Celsius. There would be 14-SOP supplier dc dc controller package for this part. With a current supply of 8mA, it runs. This controller switches with 1 phases. This the controllers dc has a nominal current supply of 8mA.
AP2011SL-13 Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Enable, Phase Control, Soft Start
Max Duty Cycle: 85 %
AP2011SL-13 Applications
There are a lot of Diodes Incorporated AP2011SL-13 DC to DC converter applications.
- Servo drive system
- Refrigerators of central air conditioners
- Pipe bending machines
- Direct power supply system
- Sink circuits
- seismic instrument power circuits
- Wind power
- Precision electronic equipment
- Domestic water pumps
- Industrial controllers
