AP2014ASL-13
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2014 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 7mA |
| Nominal Supply Current | 7mA |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 5V 12V |
| Control Features | Soft Start |
| Input Voltage (Min) | 0.76V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 460kHz |
| Max Duty Cycle | 90 % |
| Clock Sync | No |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2014ASL-13 Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. 1 outputs are supported by the dc motor controller. Packaged in solid enclosures, this pmic has a Cut Tape (CT) rating. With this function, you can deal with Transistor Driver dc switching's outputs (s). 5V 12V is the operating voltage and supply voltage of the dc control. Worked in a 0°C~125°C TJ dc switcher before. This switching controller can switch at 400kHz. dc dc regulator is made easier with Surface Mount. In order to control switching efficiently, the dcdc regulator features Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. An array of 8 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. A search for "AP2014" will reveal other relevant dc to dc converter ics. Pins number 8 of switching converter in total. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended to use 0.76V as the minimum input voltage of dc dc voltage regulator. You should note that the dc dc regulator's usual output current is 3A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 90 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulators have a maximum frequency of 460kHz. There is a 7mA volt supply current. This the controllers dc receives a 7mA nominal current supply.
AP2014ASL-13 Features
Transistor Driver Outputs
Switching Frequency: 400kHz
Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
AP2014ASL-13 Applications
There are a lot of Diodes Incorporated AP2014ASL-13 DC to DC converter applications.
- Computed tomography (CT)
- Large fire protection systems
- Motor controller circuits
- Smart grid
- ATMs
- Electric heating, lighting
- PSRR circuits
- Automatic plug-in machines
- Terrestrial set-top boxes
- Various CNC machine tools
