AP2101MPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -35°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 170mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2101 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 4 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 90m Ω |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2101MPG-13 Overview
The package is in the form of a Cut Tape (CT).It is included in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.The lighting driver is mounted in the Surface Mount position.It owns USB Switch switch type.It is best to set the temperature to -35°C~85°C TA to ensure reliable operation.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of P-Channel volts can be obtained with this LED driver.The lighting driver has Load Discharge, Status Flag features.This object belongs to the AP2101 family.A total of 8 terminations have been recorded.During operation, the 8 pins are used.There are 1 functions of the LED driver.The maximum output current must drop to 2A to meet the operation criteria.The lighting driver is mounted in the way of Surface Mount.8 pins are equipped with it.There is 170mOhm resistance on the LED driver.In this case, the output current is set to 2A.
AP2101MPG-13 Features
Resistance of 170mOhm
AP2101MPG-13 Applications
There are a lot of Diodes Incorporated AP2101MPG-13 Power Switches ICs applications.
- Hot Swap
- PC Card Hot Swap
- Hot Swaps
- Wireless/Networking Cards
- Storage (HDDs, SSDs)
- HDD, SSD
- USB3.1 Power Delivery
- Solid State Drivers
- Mobile Communication Devices
- USB Power Distribution
