AP2101SG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 850.995985mg |
| Operating Temperature | -35°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 170mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2101 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 95m Ω |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2101SG-13 Overview
It's?packaged?in?the way?of?a?Cut Tape (CT).This package is included in 8-SOIC (0.154, 3.90mm Width).Mounting type Surface Mount is selected for the LED driving board.This switch is of type USB Switch.It is recommended to set the temperature to -35°C~85°C TA in order to ensure reliable operation.The LED driver has a total of 1 outputs.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of P-Channel volts can be achieved by this LED driver.Load Discharge, Status Flag features are available on the lighting driver.It comes under the family of AP2101.There are 8 terminations in it.In order to operate, 8 pins are used.It has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 2A.The LED driving board is mounted in the way of Surface Mount.A total of 8 pins are present on it.Lighting drivers with 170mOhm resistance are used.
AP2101SG-13 Features
Resistance of 170mOhm
AP2101SG-13 Applications
There are a lot of Diodes Incorporated AP2101SG-13 Power Switches ICs applications.
- Set-Top Boxes
- Handheld Devices
- HDD and SSD
- USB Protection
- Wireless/Networking Cards
- Portable Music Players
- Portable Devices
- Gaming
- Wearable Devices
- USB3.1 Power Delivery
