AP2111SG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 850.995985mg |
| Operating Temperature | -35°C~85°C TA |
| Packaging | Digi-Reel® |
| Published | 2013 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 170mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2111 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 55μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Accuracy | 1.5 % |
| Switch Type | USB Switch |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6V |
| Turn-Off Delay Time | 4 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 95m Ω |
| Height | 1.5mm |
| Length | 4.95mm |
| Width | 3.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2111SG-13 Overview
It is packaged in the manner of a Digi-Reel?.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.This LED driving board is mounted using the mounting type Surface Mount.A USB Switch switch type is owned by it.It is best to set the temperature to -35°C~85°C TA to ensure reliable operation.The LED driver has 1 outputs.A voltage of Not Required is used to power it.The maximum output voltage of this LED driver is P-Channel volts.Load Discharge, Status Flag features are available on the lighting driver.I believe it belongs to the AP2111 family.A total of 8 terminations have been found in it.It is necessary to use the 8 pins in order to operate the LED driver.It has 1 functions.Maximum output current falls to 2A when operation criteria are met.It is positioned in the direction of Surface Mount.In total, it has 8 pins.The LED driver has 170mOhm resistance.This case results in a 2A output current.Voltage input is limited to 6V volts.Input voltage must be at least 2.5V volts.
AP2111SG-13 Features
Resistance of 170mOhm
AP2111SG-13 Applications
There are a lot of Diodes Incorporated AP2111SG-13 Power Switches ICs applications.
- Portable Music Players
- PDAs
- Various applications equipped with buttons
- PC Cards
- Portable Video Game Players
- Notebook and Tablet Computers
- Portable GPS Device
- Hot-Swap Systems
- Gaming
- Mobile Communication Devices
