AP2141DMPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 95m Ω |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2141DMPG-13 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.The mounting type of the LED driver is Surface Mount.It owns the USB Switch switch type.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of P-Channel volts can be obtained with this LED driver.Load Discharge, Status Flag features are available on the lighting driver.In total, there are 8 terminations.The 8 pins are used to operate the LED driver.It is important to note that the LED driving board has 1 functions.The maximum output current must drop to 500mA to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.As a result, it is mounted in the manner of Surface Mount.In total, it has 8 pins.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.7V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.
AP2141DMPG-13 Features
Supplied from 5V
1 channels
AP2141DMPG-13 Applications
There are a lot of Diodes Incorporated AP2141DMPG-13 Power Switches ICs applications.
- Smart Phones, Feature Phones
- Portable Music Players
- PC Cards
- Set-Top Boxes
- Set-top-box
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- Telecom and Network Systems
- Portable GPS Device
- Portable/Handheld Devices
