banner_page

AP2141FMG-7

3/5V P-Channel 0.5mm PMIC AP2141 6 Pin 5V 6-UFDFN Exposed Pad


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-AP2141FMG-7
  • Package: 6-UFDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 525
  • Description: 3/5V P-Channel 0.5mm PMIC AP2141 6 Pin 5V 6-UFDFN Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-UFDFN Exposed Pad
Number of Pins 6
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2009
JESD-609 Code e4
Feature Load Discharge, Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Resistance 120mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number AP2141
Pin Count 6
Number of Outputs 1
Output Type P-Channel
Max Output Current 500mA
Power Supplies 3/5V
Voltage 5.5V
Interface On/Off
Current 500mA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type USB Switch
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Output Peak Current Limit-Nom 0.6A
Rds On (Typ) 90m Ω
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Height 560μm
Length 1.88mm
Width 2.075mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

AP2141FMG-7 Overview


It is package in Tape & Reel (TR) case.The 6-UFDFN Exposed Pad package contains it.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of USB Switch.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.Operation is based on Not Required supply voltage.It has a maximum output voltage of P-Channel volts.Features of the lighting driver are Load Discharge, Status Flag.It belongs to the family AP2141.There are 6 terminations in it.6 pins are used for operation.The LED driving board has a total of 1 functions.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.Supply voltages of 5V allow for high efficiency.As a result, it is mounted in the manner of Surface Mount.There are 6 pins in total on this board.It has a resistance of 120mOhm.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.This part's power supply is 3/5V.

AP2141FMG-7 Features


Supplied from 5V
Resistance of 120mOhm

AP2141FMG-7 Applications


There are a lot of Diodes Incorporated AP2141FMG-7 Power Switches ICs applications.

  • Portable GPS Device
  • Hot Swap
  • USB Protection
  • Portable Devices
  • Handheld Devices
  • Mobile Communication Devices
  • USB Power Distribution
  • Wireless Modem Data Cards
  • Set-Top Boxes
  • Storage (HDDs, SSDs)

Write a review

Note: HTML is not translated!
    Bad           Good