banner_page

AP2141MPG-13

3/5V P-Channel 0.65mm PMIC AP2141 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-AP2141MPG-13
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 124
  • Description: 3/5V P-Channel 0.65mm PMIC AP2141 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2009
JESD-609 Code e3
Feature Load Discharge, Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 120mOhm
Terminal Finish Matte Tin (Sn)
Subcategory Peripheral Drivers
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Current Rating 800mA
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number AP2141
Pin Count 8
Number of Outputs 1
Output Type P-Channel
Max Output Current 500mA
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3/5V
Supply Voltage-Min (Vsup) 2.7V
Interface On/Off
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type USB Switch
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Output Peak Current Limit-Nom 0.6A
Rds On (Typ) 95m Ω
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SINK
Length 3mm
Width 3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

AP2141MPG-13 Overview


As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.The switch type is USB Switch.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.There are 1 outputs available on this lighting driver.To operate, it needs a supply voltage of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.Currently, the LED driving board is equipped with Load Discharge, Status Flag features.It belongs to the family AP2141.It contains 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.The LED driving board has a total of 1 functions.It is necessary to reduce the maximum output current to 500mA to meet the operation criteria.A supply voltage of 5V leads to high efficiency.Surface Mount is mounted in the way.8 pins are connected to it in total.It has 120mOhm resistance.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.Vsup (maximum supply voltage) is set to 5.5V.For normal operation, the supply voltage (Vsup) must be kept above 2.7V.In this case, the power supply is 3/5V.

AP2141MPG-13 Features


Supplied from 5V
Resistance of 120mOhm

AP2141MPG-13 Applications


There are a lot of Diodes Incorporated AP2141MPG-13 Power Switches ICs applications.

  • Wireless Modem Data Cards
  • Storage Drives
  • Portable GPS
  • USB Protection
  • HDD and SSD
  • Portable/Handheld Devices
  • PDAs
  • Notebook and Tablet Computers
  • Storage (HDDs, SSDs)
  • Portable Video Game Players

Write a review

Note: HTML is not translated!
    Bad           Good