AP2141SG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 95mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 800mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2141 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Power Supplies | 3/5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.6A |
| Rds On (Typ) | 95m Ω |
| Drain to Source Resistance | 120mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.5mm |
| Length | 5.3mm |
| Width | 4.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2141SG-13 Overview
A Tape & Reel (TR) is used to package it.This file is included in package 8-SOIC (0.154, 3.90mm Width).Surface Mount is the mounting type of the LED driver.The switch type of this switch is USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.A maximum voltage of P-Channel volts is available from the output of this LED driver.A lighting driver with Load Discharge, Status Flag features is available.It belongs to the AP2141 family.There are 8 terminations in it.During operation, the 8 pins are used.There are 1 functions of the LED driver.The maximum output current is reduced to 500mA to meet the operation criteria.The supply voltage can be 5V for high efficiency.The lighting driver is mounted in the way of Surface Mount.A total of 8 pins are present on it.Lighting drivers with 95mOhm resistance are used.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In this case, the power supply is 3/5V.
AP2141SG-13 Features
Supplied from 5V
Resistance of 95mOhm
AP2141SG-13 Applications
There are a lot of Diodes Incorporated AP2141SG-13 Power Switches ICs applications.
- Hot-Swap Systems
- Gaming
- USB Ports/Hubs
- Mobile Communication Devices
- Hot Swap
- HDD, SSD
- Low Voltage I/O System Power
- Portable Devices
- Set-Top Boxes
- Portable Video Game Players
