Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
JESD-609 Code |
e3 |
Feature |
Load Discharge, Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Resistance |
120MOhm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Peripheral Drivers |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Current Rating |
800mA |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
AP2141 |
Pin Count |
5 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
500mA |
Voltage |
5.5V |
Interface |
On/Off |
Current |
500mA |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
USB Switch |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
Output Peak Current Limit-Nom |
0.6A |
Rds On (Typ) |
95m Ω |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
Height |
1.3mm |
Length |
3.1mm |
Width |
1.7mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
AP2141WG-7 Overview
The LED driver's packaged as a Tape & Reel (TR).It's included in the SC-74A, SOT-753 package.The LED driver is mounted as Surface Mount.A USB Switch switch type is owned by it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.A maximum output voltage of P-Channel volts can be obtained with this LED driver.In terms of features, the LED driving board has Load Discharge, Status Flag.It is a member of the AP2141 family.There are 5 terminations in it.The operation is performed through the 5 pins.As far as functions are concerned, the lighting driver has 1.In order to meet the operation criteria, the maximum output current drops to 500mA.Supply voltages of 5V allow for high efficiency.This lighting driver is mounted in the way of Surface Mount.5 pins are equipped with it.120MOhm is the resistance of the lighting driver.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.
AP2141WG-7 Features
Supplied from 5V
Resistance of 120MOhm
AP2141WG-7 Applications
There are a lot of Diodes Incorporated AP2141WG-7 Power Switches ICs applications.
- Set-Top Boxes
- Handheld Devices
- Hot Swap
- PDAs
- Hard Disk Drives
- PC Cards
- HDD, SSD
- Portable GPS
- Portable Video Game Players
- Hot Swaps