AP2142AFGEG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 125mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | AP2142 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Height Seated (Max) | 0.63mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2142AFGEG-7 Overview
As a result, it is packaged in the form of a Cut Tape (CT).This package is included in 8-UDFN Exposed Pad.The lighting driver is mounted in the Surface Mount position.This switch is of type USB Switch.Keeping the temperature at -40°C~85°C TA ensures reliable operation.It is possible to use 2 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.It has a total of Load Discharge, Status Flag features.The AP2142 family consists of this type.It has a total of 8 terminations.8 pins are used for operation.It is important to note that the LED driving board has 1 functions.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.High efficiency is possible when the supply voltage is set to 5V.As a result, it is mounted in the manner of Surface Mount.8 pins are equipped with it.Currently, the LED driving board has 125mOhm resistance.The maximum supply voltage is set to 5.5V.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.A total of 2 channels are available for you to choose from.
AP2142AFGEG-7 Features
Supplied from 5V
Resistance of 125mOhm
2 channels
AP2142AFGEG-7 Applications
There are a lot of Diodes Incorporated AP2142AFGEG-7 Power Switches ICs applications.
- Wireless Headsets
- PC Cards
- Portable Devices
- Solid State Drivers
- Low Voltage I/O System Power
- Wireless Modem Data Cards
- USB Ports/Hubs
- HDD, SSD
- Portable GPS
- Portable GPS Device
