AP2142AMPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 125mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Height | 580μm |
| Length | 3.05mm |
| Width | 3.05mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2142AMPG-13 Overview
The LED driver's packaged as a Cut Tape (CT).This package is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.It has been mounted as Surface Mount on the LED driver.There is a USB Switch switch type associated with it.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.In this LED driver, there are no outputs available.Operation is based on Not Required supply voltage.There is a maximum output voltage of P-Channel volts.Load Discharge, Status Flag features are available on the lighting driver.There are 8 terminations in it.During operation, the 8 pins are used.It consists of 1 functions.The maximum output current is reduced to 500mA to meet the operation criteria.The supply voltage can be 5V for high efficiency.The lighting driver is mounted in the direction of Surface Mount.As a result, it has a total of 8 pins.There is 125mOhm resistance on the LED driver.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.In total, 2 channels are available.This LED driver can handle voltages up to 5.5V volts.As a minimum input voltage, it requires 2.7V volts.
AP2142AMPG-13 Features
Supplied from 5V
Resistance of 125mOhm
2 channels
AP2142AMPG-13 Applications
There are a lot of Diodes Incorporated AP2142AMPG-13 Power Switches ICs applications.
- Hot Swap
- Hot Swaps
- HDD and SSD
- Hot-Swap Systems
- USB Power Distribution
- Hard Disk Drives
- USB Power Distribution
- Wearable Devices
- Set-Top Boxes
- Telecom and Network Systems
