AP2142ASG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 73.992255mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2142 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 90m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2142ASG-13 Overview
Cut Tape (CT) is the way it's packaged.This file is included in package 8-SOIC (0.154, 3.90mm Width).The lighting driver is mounted in the Surface Mount position.There is a switch type of USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.There is a default setting of 2 for output.Operation is based on a supply voltage of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.Currently, the LED driving board is equipped with Load Discharge, Status Flag features.The AP2142 family consists of this type.There are 8 terminations in it.The 8 pins are used for the operation of the system.Currently, the lighting driver has a total of 1 functions.Maximum output current falls to 500mA when operation criteria are met.It is possible to achieve a high level of efficiency with a supply voltage of 5V.As a result, it is mounted in the manner of Surface Mount.As a result, it has a total of 8 pins.130mOhm is the resistance of the lighting driver.The maximum supply voltage is set to 5.5V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.We offer 2 channels in total.
AP2142ASG-13 Features
Supplied from 5V
Resistance of 130mOhm
2 channels
AP2142ASG-13 Applications
There are a lot of Diodes Incorporated AP2142ASG-13 Power Switches ICs applications.
- Notebook PC
- Solid-State Drives
- Portable Devices
- Wireless/Networking Cards
- Various applications equipped with buttons
- Low Voltage I/O System Power
- USB3.1 Power Delivery
- Portable GPS Device
- Notebook and Tablet Computers
- Smart Phones, Feature Phones
