AP2142MPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 50 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 115m Ω |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
AP2142MPG-13 Overview
As you can see, it's packaged in the way of a Cut Tape (CT).It is included in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.It owns the USB Switch switch type.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.There are 2 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of P-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Status Flag.It contains 8 terminations.During operation, the 8 pins are used.Currently, there are 2 functions associated with the lighting driver.Maximum output current falls to 500mA when operation criteria are met.A supply voltage of 5V leads to high efficiency.The lighting driver is mounted in the way of Surface Mount.The LED driver has a total of 8 pins.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.A maximum supply voltage of 5.5V is set in Vsup.This part has a power supply of 3/5V.
AP2142MPG-13 Features
Supplied from 5V
AP2142MPG-13 Applications
There are a lot of Diodes Incorporated AP2142MPG-13 Power Switches ICs applications.
- Hard Disk Drives
- PC Card Hot Swap
- Smartphone and PDA
- Portable Music Players
- Smart Phones, Feature Phones
- Notebook PC
- Wireless Headsets
- Wireless/Networking Cards
- Portable/Handheld Devices
- Handheld Devices
