AP2145MPG-13
| Parameters | |
|---|---|
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2145 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
AP2145MPG-13 Overview
A Tape & Reel (TR) is used to package it.It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package as well.The lighting driver is mounted in the Surface Mount position.USB Switch is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.Status Flag features are available on the lighting driver.It comes under the family of AP2145.It contains 8 terminations.The operation is carried out using the 8 pins.It has 1 functions.The maximum output current is reduced to 500mA to meet the operation criteria.Using a voltage of 3.3V allows for high efficiency.It is positioned in the direction of Surface Mount.A total of 8 pins are included in this LED driver.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 2.7V.In this case, the power supply is 3/5V.
AP2145MPG-13 Features
Supplied from 3.3V
AP2145MPG-13 Applications
There are a lot of Diodes Incorporated AP2145MPG-13 Power Switches ICs applications.
- Low Voltage I/O System Power
- Hot-Swap Systems
- USB Ports/Hubs
- Portable GPS Device
- Set-top-box
- USB3.1 Power Delivery
- Solid State Drivers
- Wireless Headsets
- Smart Phones, Feature Phones
- Wireless/Networking Cards
