AP2146MPG-13

5V P-Channel 0.65mm PMIC AP2146 8 Pin 3.3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Diodes Incorporated
Nocochips NO: 233-AP2146MPG-13
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: PDF
Stock: 473
Description: 5V P-Channel 0.65mm PMIC AP2146 8 Pin 3.3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	AP2146
Pin Count	8
Number of Outputs	2
Output Type	P-Channel
Max Output Current	500mA
Power Supplies	5V
Interface	On/Off
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	USB Switch
Min Input Voltage	2.7V
Max Input Voltage	5.5V
Ratio - Input:Output	1:2
Voltage - Load	2.7V~5.5V
Driver Number of Bits	2
Fault Protection	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Output Peak Current Limit-Nom	0.5A
Rds On (Typ)	90m Ω
Built-in Protections	OVER CURRENT; THERMAL
Output Current Flow Direction	SINK
Height	950μm
Length	3.1mm
Width	3.1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e3
Feature	Status Flag
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Peripheral Drivers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.65mm

AP2146MPG-13 Overview

The package is in the form of a Tape & Reel (TR).The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package includes it.The LED driver is mounted as Surface Mount.It owns USB Switch switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has 2 outputs.A voltage of Not Required is used to power it.A maximum output voltage of P-Channel volts can be achieved by this LED driver.There are Status Flag features available on the LED driving board.It is part of the AP2146 family of LED drivers.There are 8 terminations in it.It is necessary to use the 8 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.To meet the operation criteria, the maximum output current drops to 500mA.The supply voltage of 3.3V is conducive to high efficiency.In this case, it is mounted in the way of Surface Mount.There are 8 pins in total on this board.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.This part has a power supply of 5V.A maximum input voltage of 5.5V volts can be applied to it.It requires 2.7V volts as the minimum input voltage.