AP2151AFM-7
| Parameters | |
|---|---|
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-N6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.6A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 0.605mm |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
AP2151AFM-7 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The 6-UFDFN Exposed Pad package includes it.The LED driver is mounted as Surface Mount.There is a USB Switch switch type associated with it.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.As a default, the output is set to 1.Operation is based on a supply voltage of Not Required.The maximum output voltage is P-Channel volts.In terms of features, the LED driving board has Status Flag.In total, there are 6 terminations.It is important to note that the LED driving board has 1 functions.Maximum output current falls to 500mA when operation criteria are met.The supply voltage can be 5V for high efficiency.The maximum supply voltage for this LED driver is 5.5V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 2.7V.
AP2151AFM-7 Features
Supplied from 5V
AP2151AFM-7 Applications
There are a lot of Diodes Incorporated AP2151AFM-7 Power Switches ICs applications.
- Storage Drives
- Portable GPS Device
- Handheld Devices
- Set-top-box
- USB Power Distribution
- Low Voltage I/O System Power
- Storage (HDDs, SSDs)
- Hot Swap
- Solid-State Drives
- Portable Music Players
