AP2151DFMG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 90m Ω |
| Height Seated (Max) | 0.53mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2151DFMG-7 Overview
The LED driver's packaged as a Tape & Reel (TR).The 6-UFDFN Exposed Pad package includes it.It has been mounted as Surface Mount on the LED driver.There is a switch type of USB Switch.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.As a default, the output is set to 1.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.The lighting driver has Load Discharge, Status Flag features.It consists of 6 terminations in total.In order to operate, the 6 pins are used.The LED driving board has a total of 1 functions.The maximum output current drops to 500mA in order to meet the operation criteria.Using a voltage of 5V allows for high efficiency.As a result, it is mounted in the manner of Surface Mount.A total of 6 pins are present on it.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.7V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.The total number of channels is 1.
AP2151DFMG-7 Features
Supplied from 5V
1 channels
AP2151DFMG-7 Applications
There are a lot of Diodes Incorporated AP2151DFMG-7 Power Switches ICs applications.
- USB Power Distribution
- USB3.1 Power Delivery
- Notebook and Tablet Computers
- Mobile Communication Devices
- Wireless Modem Data Cards
- Hot Swaps
- USB Protection
- Portable Music Players
- Notebook PC
- Smart Phones, Feature Phones
