AP2151DMPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP-EP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Feature | Load Discharge, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | AP2151 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 95mOhm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2151DMPG-13 Overview
The LED driver's packaged as a Tape & Reel (TR).It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package as well.The mounting type of the LED driver is Surface Mount.This switch is of type USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 1 outputs.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts on this LED driver.Load Discharge, Status Flag features are available on the lighting driver.It belongs to the AP2151 family.For operation, we use the 8 pins.From the lighting driver, there is a maximum output of 500mAV.The maximum output current must drop to 500mA to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.Stable operation is possible with a maximum operating temperature of 85°C°C.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.In terms of supply voltage, it is capable of handling a maximum of 5.5V volts.It can operate at low supply voltages, such as 2.7V volts.
AP2151DMPG-13 Features
AP2151DMPG-13 Applications
There are a lot of Diodes Incorporated AP2151DMPG-13 Power Switches ICs applications.
- Hot Swap
- Storage Drives
- Handheld Devices
- Hot Swaps
- HDD and SSD
- Smart Phones, Feature Phones
- Various applications equipped with buttons
- Low Voltage I/O System Power
- Hot Swap
- Notebook PC
