AP2151DWG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 115mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2151 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 95m Ω |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2151DWG-7 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the SC-74A, SOT-753 package as well.This lighting drivere has a mounting type of Surface Mount.There is a USB Switch switch type associated with it.Keeping the temperature at -40°C~85°C TA ensures reliable operation.There are 1 outputs available on this lighting driver.A supply voltage of Not Required is required for it to operate.Voltage output is P-Channel volts at maximum.The lighting driver has Load Discharge, Status Flag features.It is part of the AP2151 family of LED drivers.There are 5 terminations in it.In order to operate, the 5 pins are used.Currently, the lighting driver has a total of 1 functions.This results in the maximum output current dropping to 500mA to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.This lighting driver is mounted in the way of Surface Mount.A total of 5 pins are included in this LED driver.Currently, the LED driving board has 115mOhm resistance.A normal operation requires that the supply voltage (Vsup) remain above 2.7V.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.
AP2151DWG-7 Features
Supplied from 5V
Resistance of 115mOhm
1 channels
AP2151DWG-7 Applications
There are a lot of Diodes Incorporated AP2151DWG-7 Power Switches ICs applications.
- Smart Phones, Feature Phones
- Handheld Devices
- Solid-State Drives
- USB Protection
- Wireless/Networking Cards
- USB Ports/Hubs
- Portable Video Game Players
- Hard Disk Drives
- Telecom and Network Systems
- Hot Swap
