AP2151FMG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2151 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Power Supplies | 3/5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.6A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 560μm |
| Length | 1.88mm |
| Width | 2.075mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2151FMG-7 Overview
Tape & Reel (TR) is how it's packaged.There is a package for it in the 6-UFDFN Exposed Pad package.A Surface Mount mounting is used for the LED driving board.There is a USB Switch switch type associated with it.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.There is a default setting of 1 for output.Operation is based on Not Required supply voltage.The maximum output voltage of this LED driver is P-Channel volts.A lighting driver with Status Flag features is available.It is a member of the AP2151 family.A total of 6 terminations have been recorded.For operation, we use the 6 pins.It contains 1 functions.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.As long as the supply voltage is 5V, high efficiency can be achieved.Surface Mount is mounted in the way.The LED driving board is equipped with a total of 6 pins.In this case, there is 120mOhm resistance in the LED driving board.It is self-contained in an econtainer with a capacity of Peripheral Drivers.A 3/5V power supply is used by the part.
AP2151FMG-7 Features
Supplied from 5V
Resistance of 120mOhm
AP2151FMG-7 Applications
There are a lot of Diodes Incorporated AP2151FMG-7 Power Switches ICs applications.
- USB3.1 Power Delivery
- USB Power Distribution
- PC Cards
- Various applications equipped with buttons
- Storage (HDDs, SSDs)
- Wearable Devices
- Hot Swaps
- Notebook PC
- Solid State Drivers
- Hot-Swap Systems
