AP2151MPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 115MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 800mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2151 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Power Supplies | 3/5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.6A |
| Rds On (Typ) | 95m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2151MPG-13 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It is included in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.This LED driving board is mounted using the mounting type Surface Mount.A USB Switch switch type is owned by it.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.As a default, the output is set to 1.Operation is based on Not Required supply voltage.It has a maximum output voltage of P-Channel volts.It is equipped with Status Flag features.It is part of the AP2151 family of LED drivers.A total of 8 terminations have been recorded.The operation is performed through the 8 pins.The LED driving board has a total of 1 functions.The maximum output current must drop to 500mA to meet the operation criteria.The supply voltage of 5V is conducive to high efficiency.The lighting driver is mounted in the way of Surface Mount.It is equipped with a total of 8 pins.Currently, the LED driving board has a resistance of 115MOhm ohms.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In this part, the power supply is set to 3/5V.
AP2151MPG-13 Features
Supplied from 5V
Resistance of 115MOhm
AP2151MPG-13 Applications
There are a lot of Diodes Incorporated AP2151MPG-13 Power Switches ICs applications.
- Portable Music Players
- Hot-Swap Systems
- Set-Top Boxes
- PC Cards
- Smart Phones, Feature Phones
- Mobile Communication Devices
- Wearable Devices
- USB Power Distribution
- PC Card Hot Swap
- USB Ports/Hubs
