AP2151WG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 95mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2151 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.6A |
| Rds On (Typ) | 95m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Drain to Source Resistance | 95mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Ambient Temperature Range High | 85°C |
| On-State Resistance | 95mOhm |
| Height | 1.4mm |
| Length | 3.1mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2151WG-7 Overview
Tape & Reel (TR) is the way it's packaged.There is a package for it in the SC-74A, SOT-753 package.Surface Mount is the mounting type of the LED driver.The switch type of this switch is USB Switch.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.By default, it is set to output 1.It uses a supply voltage of Not Required to operate.A maximum output voltage of P-Channel volts can be achieved by this LED driver.It has a total of Status Flag features.This object belongs to the AP2151 family.A total of 5 terminations have been recorded.The 5 pins are used for the operation of the system.Currently, the lighting driver has a total of 1 functions.The maximum output current must drop to 500mA to meet the operation criteria.Using a voltage of 5V allows for high efficiency.This lighting driver is mounted in the way of Surface Mount.5 pins are connected to it in total.Lighting drivers with 95mOhm resistance are used.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.
AP2151WG-7 Features
Supplied from 5V
Resistance of 95mOhm
AP2151WG-7 Applications
There are a lot of Diodes Incorporated AP2151WG-7 Power Switches ICs applications.
- PC Cards
- Wearable Devices
- Portable GPS
- Handheld Devices
- Smart Phones, Feature Phones
- USB Power Distribution
- PDAs
- Set-top-box
- Smartphone and PDA
- Mobile Communication Devices
