AP2152AMPG-13

P-Channel 0.65mm PMIC AP2152 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Diodes Incorporated
Nocochips NO: 233-AP2152AMPG-13
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: PDF
Stock: 797
Description: P-Channel 0.65mm PMIC AP2152 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
Published	2009
JESD-609 Code	e3
Feature	Load Discharge, Status Flag
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	125mOhm
Terminal Finish	Matte Tin (Sn)
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	AP2152
Pin Count	8
Number of Outputs	2
Output Voltage	3.3V
Output Type	P-Channel
Max Output Current	500mA
Supply Voltage-Max (Vsup)	5.5V
Number of Channels	2
Interface	On/Off
Analog IC - Other Type	POWER SUPPLY SUPPORT CIRCUIT
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Adjustable Threshold	NO
Input Type	Non-Inverting
Switch Type	USB Switch
Ratio - Input:Output	1:2
Voltage - Load	2.7V~5.5V
Fault Protection	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Rds On (Typ)	85m Ω
Height Seated (Max)	1.1mm
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

AP2152AMPG-13 Overview

A Cut Tape (CT) is used to package it.It is included in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.Surface Mount is the mounting type of the LED driver.There is a switch type of USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.There is a maximum output voltage of P-Channel volts.This LED driving board is equipped with Load Discharge, Status Flag features in order for it to be useful.It is a member of the AP2152 family.The termination count is 8.The 8 pins are used for the operation of the system.Currently, there are 1 functions associated with the lighting driver.This results in the maximum output current dropping to 500mA to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.This lighting driver is mounted in the way of Surface Mount.8 pins are equipped with it.It has a resistance of 125mOhm.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.A total of 2 channels are available for you to choose from.