AP2152SG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 73.992255mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Current Rating | 800mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2152 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 50 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 120m Ω |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2152SG-13 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This file is included in package 8-SOIC (0.154, 3.90mm Width).Mounting type Surface Mount is selected for the LED driving board.USB Switch is the switch type it owns.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts.Currently, the LED driving board is equipped with Status Flag features.As you can see, it comes from the AP2152 family.A total of 8 terminations can be found in it.In order to operate, 8 pins are used.It is important to note that the LED driving board has 2 functions.To comply with the operation criteria, the maximum output current is reduced to 500mA.As long as the supply voltage is 5V, high efficiency can be achieved.It is positioned in the direction of Surface Mount.The LED driving board is equipped with a total of 8 pins.In this case, there is 150mOhm resistance in the LED driving board.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The maximum supply voltage is set to 5.5V.This part is powered by 3/5V.
AP2152SG-13 Features
Supplied from 5V
Resistance of 150mOhm
AP2152SG-13 Applications
There are a lot of Diodes Incorporated AP2152SG-13 Power Switches ICs applications.
- USB3.1 Power Delivery
- Solid State Drivers
- Portable GPS Device
- Portable GPS
- Notebook PC
- USB Power Distribution
- USB Ports/Hubs
- Wireless Modem Data Cards
- Portable Music Players
- PC Card Hot Swap
