AP2161FMG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2161 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2161FMG-7 Overview
The LED driver's packaged as a Tape & Reel (TR).Package 6-UFDFN Exposed Pad contains it.The mounting type of the LED driver is Surface Mount.It owns USB Switch switch type.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The LED driver has 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of P-Channel volts has been specified.A lighting driver with Status Flag features is available.It is a member of the AP2161 family.A total of 6 terminations can be found in it.The operation is performed through the 6 pins.As far as functions are concerned, the lighting driver has 1.The maximum output current must drop to 1A to meet the operation criteria.The supply voltage of 5V is conducive to high efficiency.Surface Mount is mounted in the way of this lighting driver.As a result, it has a total of 6 pins.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The maximum supply voltage for this LED driver is 5.5V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 2.7V.This part's power supply is 3/5V.
AP2161FMG-7 Features
Supplied from 5V
AP2161FMG-7 Applications
There are a lot of Diodes Incorporated AP2161FMG-7 Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Telecom and Network Systems
- Portable Devices
- USB Ports/Hubs
- Smartphone and PDA
- Portable/Handheld Devices
- USB Power Distribution
- Portable Music Players
- Solid-State Drives
- HDD and SSD
