AP2161MPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 115MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 1.5A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 95m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2161MPG-13 Overview
A Tape & Reel (TR) is used to package it.The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package includes it.The LED driver is mounted as Surface Mount.USB Switch is the type of switch owned by it.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.A lighting driver with Status Flag features is available.It contains 8 terminations.In order to operate, the 8 pins are used.The LED driving board has a total of 1 functions.This results in the maximum output current dropping to 1A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.In this case, it is mounted in the way of Surface Mount.A total of 8 pins are present on it.Currently, the LED driving board has a resistance of 115MOhm ohms.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.Vsup (maximum supply voltage) is set to 5.5V.Normal operation requires a voltage above 2.7V for the supply voltage.There is a voltage supply of 3/5V volts on this part.
AP2161MPG-13 Features
Supplied from 5V
Resistance of 115MOhm
AP2161MPG-13 Applications
There are a lot of Diodes Incorporated AP2161MPG-13 Power Switches ICs applications.
- Set-top-box
- Portable Devices
- USB Protection
- Portable GPS
- Portable Music Players
- Portable/Handheld Devices
- Hot-Swap Systems
- Mobile Communication Devices
- Hot Swap
- Storage (HDDs, SSDs)
