AP2162AFGEG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 125mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2162A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Height Seated (Max) | 0.63mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2162AFGEG-7 Overview
As a result, it is packaged in the form of a Cut Tape (CT).It's included in the 8-UDFN Exposed Pad package.The mounting type of the LED driver is Surface Mount.There is a switch type of USB Switch.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has a total of 2 outputs.The LED driving board is powered by a voltage of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.It is equipped with Load Discharge, Status Flag features.I believe it belongs to the AP2162A family.It contains 8 terminations.In order to operate, the 8 pins are used.It is important to note that the LED driving board has 1 functions.This operation requires the maximum output current to be decreased to 1A.Supply voltages of 5V allow for high efficiency.As a result, it is mounted in the manner of Surface Mount.8 pins are connected to it in total.In this case, there is 125mOhm resistance in the LED driving board.The maximum supply voltage for this LED driver is 5.5V (Vsup).The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 2 channels available.
AP2162AFGEG-7 Features
Supplied from 5V
Resistance of 125mOhm
2 channels
AP2162AFGEG-7 Applications
There are a lot of Diodes Incorporated AP2162AFGEG-7 Power Switches ICs applications.
- Solid-State Drives
- HDD, SSD
- PC Card Hot Swap
- Hot Swaps
- Portable GPS Device
- Telecom and Network Systems
- Storage Drives
- Portable Devices
- Notebook and Tablet Computers
- Mobile Communication Devices
