AP2162MPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 150MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 1.5A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 50 μs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 115m Ω |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2162MPG-13 Overview
The LED driver's packaged as a Tape & Reel (TR).It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package as well.The LED driver is mounted as Surface Mount.A USB Switch switch type is owned by it.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver has a total of 2 outputs.A supply voltage of Not Required is required for it to operate.The maximum output voltage of this LED driver is P-Channel volts.The lighting driver has Status Flag features.There are 8 terminations in it.For operation, we use the 8 pins.It consists of 2 functions.To meet the operation criteria, the maximum output current drops to 1A.As long as the supply voltage is 5V, high efficiency can be achieved.Surface Mount is mounted in the way of this lighting driver.There are 8 pins in total on this board.Currently, the LED driving board has a resistance of 150MOhm ohms.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.In this case, Vsup (maximum supply voltage) is set to 5.5V.It has a power supply of 3/5V.
AP2162MPG-13 Features
Supplied from 5V
Resistance of 150MOhm
AP2162MPG-13 Applications
There are a lot of Diodes Incorporated AP2162MPG-13 Power Switches ICs applications.
- Smartphone and PDA
- USB Ports/Hubs
- Low Voltage I/O System Power
- HDD, SSD
- Portable GPS
- Solid-State Drives
- USB Power Distribution
- Notebook and Tablet Computers
- Wireless Headsets
- Hot-Swap Systems
