AP2171DFMG-7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2171 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 90m Ω |
| Height Seated (Max) | 0.53mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2171DFMG-7 Overview
The package is in the form of a Tape & Reel (TR).Package 6-UFDFN Exposed Pad contains it.This LED driving board is mounted using the mounting type Surface Mount.It owns USB Switch switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 1.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.It is part of the AP2171 family of LED drivers.In total, there are 6 terminations.It is necessary to use the 6 pins in order to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.In order to meet the operation criteria, the maximum output current drops to 1A.A supply voltage of 5V leads to high efficiency.In this case, it is mounted in the way of Surface Mount.This LED driver is equipped with a total of 6 pins.A maximum supply voltage of 5.5V is set in Vsup.Normal operation requires Vsup above 2.7V.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.In total, there are 1 channels available.
AP2171DFMG-7 Features
Supplied from 5V
1 channels
AP2171DFMG-7 Applications
There are a lot of Diodes Incorporated AP2171DFMG-7 Power Switches ICs applications.
- Hot Swaps
- PDAs
- Hot Swap
- Smartphone and PDA
- PC Cards
- Wireless/Networking Cards
- PC Card Hot Swap
- USB Power Distribution
- Hot-Swap Systems
- Storage Drives
