AP2171DM8G-13
| Parameters | |
|---|---|
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 95m Ω |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Digi-Reel® |
| Published | 2015 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 90mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
AP2171DM8G-13 Overview
As a result, it is packaged in the form of a Digi-Reel?.It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package as well.The lighting driver has the mounting type Surface Mount.USB Switch is the switch type that it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.By default, it is set to output 1.A supply voltage of Not Required is required for it to operate.A maximum output voltage of P-Channel volts has been specified.Status Flag features are available on the lighting driver.As a result, there are 8 terminations.For operation, 8 pins are used.It has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1A.The supply voltage can be 5V for high efficiency.It is positioned in the direction of Surface Mount.90mOhm resistance is present in the lighting driver.As a result, the output current is set to 1A.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 2.7V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.
AP2171DM8G-13 Features
Supplied from 5V
Resistance of 90mOhm
1 channels
AP2171DM8G-13 Applications
There are a lot of Diodes Incorporated AP2171DM8G-13 Power Switches ICs applications.
- Wireless Modem Data Cards
- Set-top-box
- PC Card Hot Swap
- Portable/Handheld Devices
- Portable Music Players
- USB Ports/Hubs
- Hot Swaps
- Wearable Devices
- Hot Swap
- Wireless/Networking Cards
