AP2171MPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 115MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 1.5A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2171 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Power Supplies | 3/5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 95m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2171MPG-13 Overview
Tape & Reel (TR) is how it's packaged.There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package that includes it.In this case, the LED driving board is mounted as Surface Mount.The switch type is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 1.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of P-Channel volts has been specified.The lighting driver has Status Flag features.As you can see, it comes from the AP2171 family.It contains 8 terminations.In order to operate, 8 pins are used.It consists of 1 functions.The maximum output current drops to 1A in order to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.This lighting driver is mounted in the way of Surface Mount.In total, it has 8 pins.Currently, the LED driving board has a resistance of 115MOhm ohms.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This part has a power supply of 3/5V.
AP2171MPG-13 Features
Supplied from 5V
Resistance of 115MOhm
AP2171MPG-13 Applications
There are a lot of Diodes Incorporated AP2171MPG-13 Power Switches ICs applications.
- Hot-Swap Systems
- USB3.1 Power Delivery
- Mobile Communication Devices
- Portable GPS
- Smart Phones, Feature Phones
- Hard Disk Drives
- Set-Top Boxes
- PC Card Hot Swap
- Wireless/Networking Cards
- Wireless Headsets
