AP2172AFGEG-7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 125mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Height Seated (Max) | 0.63mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2172AFGEG-7 Overview
The package is in the form of a Cut Tape (CT).This file is included in package 8-UDFN Exposed Pad.Surface Mount is the mounting type of the LED driver.The switch type is USB Switch.Keeping the temperature at -40°C~85°C TA ensures reliable operation.There are 2 outputs available on this lighting driver.With a supply voltage of Not Required, the LED driving board operates.A maximum voltage of P-Channel volts is available from the output of this LED driver.It is equipped with Load Discharge, Status Flag features.The termination count is 8.In order to operate, the 8 pins are used.As far as functions are concerned, the lighting driver has 1.This operation requires the maximum output current to be decreased to 1A.The supply voltage of 5V is conducive to high efficiency.The LED driving board is mounted in the way of Surface Mount.As a result, it has a total of 8 pins.125mOhm is the resistance of the lighting driver.In this case, Vsup (maximum supply voltage) is set to 5.5V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 channels to choose from.
AP2172AFGEG-7 Features
Supplied from 5V
Resistance of 125mOhm
2 channels
AP2172AFGEG-7 Applications
There are a lot of Diodes Incorporated AP2172AFGEG-7 Power Switches ICs applications.
- Portable GPS
- Portable GPS Device
- Mobile Communication Devices
- Notebook PC
- Set-Top Boxes
- Gaming
- PC Cards
- Storage Drives
- USB Protection
- Portable Video Game Players
