banner_page

AP2172AMPG-13

P-Channel 0.65mm PMIC AP2172A 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-AP2172AMPG-13
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 587
  • Description: P-Channel 0.65mm PMIC AP2172A 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Cut Tape (CT)
Published 2010
JESD-609 Code e3
Feature Load Discharge, Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 125mOhm
Terminal Finish Matte Tin (Sn)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number AP2172A
Pin Count 8
Number of Outputs 2
Output Type P-Channel
Max Output Current 1A
Number of Channels 2
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Input Type Non-Inverting
Switch Type USB Switch
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Ratio - Input:Output 1:2
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Rds On (Typ) 85m Ω
Height 950μm
Length 3.1mm
Width 3.1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

AP2172AMPG-13 Overview


As you can see, it's packaged in the way of a Cut Tape (CT).It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package as well.Surface Mount is the mounting type of the LED driver.It owns the USB Switch switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.By default, it is set to output 2.The LED driving board is powered by a voltage of Not Required.It has a maximum output voltage of P-Channel volts.The lighting driver has Load Discharge, Status Flag features.As you can see, it comes from the AP2172A family.It contains 8 terminations.In order to operate, 8 pins are used.Currently, there are 1 functions associated with the lighting driver.To meet the operation criteria, the maximum output current drops to 1A.High efficiency is possible at 5V supply voltage.Surface Mount is mounted in the way of this LED driving board.A total of 8 pins are included in this LED driver.Lighting drivers with 125mOhm resistance are used.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.To choose from, there are 2 channels.There is a maximum input voltage of 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.

AP2172AMPG-13 Features


Supplied from 5V
Resistance of 125mOhm
2 channels

AP2172AMPG-13 Applications


There are a lot of Diodes Incorporated AP2172AMPG-13 Power Switches ICs applications.

  • Telecom and Network Systems
  • Hard Disk Drives
  • PC Card Hot Swap
  • Wireless/Networking Cards
  • Portable/Handheld Devices
  • Hot Swap
  • Solid-State Drives
  • Wearable Devices
  • PDAs
  • Portable Devices

Write a review

Note: HTML is not translated!
    Bad           Good