AP2172ASG-13
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 73.992255mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 90m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2172ASG-13 Overview
A Cut Tape (CT) is used to package it.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is USB Switch.To ensure reliable operation, set the temperature to -40°C~85°C TA.The LED driver has 2 outputs.To operate, it needs a supply voltage of Not Required.Voltage output is P-Channel volts at maximum.In terms of features, the LED driving board has Load Discharge, Status Flag.A total of 8 terminations have been found in it.For operation, we use the 8 pins.Currently, the lighting driver has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 1A.As long as the supply voltage is 5V, high efficiency can be achieved.It is mounted in the way of Surface Mount.In total, it has 8 pins.There is 130mOhm resistance on the LED driver.The maximum supply voltage for this LED driver is 5.5V (Vsup).There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.A total of 2 channels are available for you to choose from.
AP2172ASG-13 Features
Supplied from 5V
Resistance of 130mOhm
2 channels
AP2172ASG-13 Applications
There are a lot of Diodes Incorporated AP2172ASG-13 Power Switches ICs applications.
- PDAs
- PC Card Hot Swap
- Handheld Devices
- Wearable Devices
- PC Cards
- Hard Disk Drives
- Smart Phones, Feature Phones
- Wireless Headsets
- HDD and SSD
- Gaming
