AP2172MPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 150MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 1.5A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2172 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 50 μs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 115m Ω |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2172MPG-13 Overview
It is packaged in the form of a Tape & Reel (TR).This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.A Surface Mount mounting is used for the LED driving board.It owns USB Switch switch type.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.There is a default setting of 2 for output.A supply voltage of Not Required is required for it to operate.The maximum output voltage is P-Channel volts.It has a total of Status Flag features.This object belongs to the AP2172 family.It consists of 8 terminations in total.For operation, we use the 8 pins.The LED driver has 2 functions.In order to meet the operation criteria, the maximum output current drops to 1A.A supply voltage of 5V leads to high efficiency.Surface Mount is mounted in the way.8 pins are connected to it in total.There is 150MOhm resistance on the LED driver.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The maximum supply voltage is set to 5.5V.In this case, the power supply is 3/5V.
AP2172MPG-13 Features
Supplied from 5V
Resistance of 150MOhm
AP2172MPG-13 Applications
There are a lot of Diodes Incorporated AP2172MPG-13 Power Switches ICs applications.
- Portable Video Game Players
- Smartphone and PDA
- Portable Devices
- USB3.1 Power Delivery
- Portable/Handheld Devices
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- Hot Swaps
- Portable Music Players
- Storage Drives
