AP2172SG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 73.992255mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 50 μs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 120m Ω |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2172SG-13 Overview
It is packaged in the manner of a Tape & Reel (TR).There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.In this case, the LED driving board is mounted as Surface Mount.This switch is of type USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.There are 2 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.Voltage output is P-Channel volts at maximum.It has a total of Status Flag features.There are 8 terminations in it.The operation is performed through the 8 pins.Currently, there are 2 functions associated with the lighting driver.The maximum output current drops to 1A in order to meet the operation criteria.Supply voltages of 5V allow for high efficiency.It is positioned in the direction of Surface Mount.A total of 8 pins are present on it.In this case, there is 120mOhm resistance in the LED driving board.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.A maximum supply voltage of 5.5V is set in Vsup.This part is powered by 3/5V.
AP2172SG-13 Features
Supplied from 5V
Resistance of 120mOhm
AP2172SG-13 Applications
There are a lot of Diodes Incorporated AP2172SG-13 Power Switches ICs applications.
- Portable GPS Device
- Portable Music Players
- Storage (HDDs, SSDs)
- Portable GPS
- Portable Devices
- Wireless Modem Data Cards
- Hot-Swap Systems
- Handheld Devices
- Telecom and Network Systems
- USB Ports/Hubs
