AP2176MPG-13

3/5V P-Channel 0.65mm PMIC AP2176 8 Pin 3.3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Diodes Incorporated
Nocochips NO: 233-AP2176MPG-13
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: PDF
Stock: 150
Description: 3/5V P-Channel 0.65mm PMIC AP2176 8 Pin 3.3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Pin Count	8
Number of Outputs	2
Output Type	P-Channel
Max Output Current	1A
Supply Voltage-Max (Vsup)	5.5V
Power Supplies	3/5V
Interface	On/Off
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	USB Switch
Ratio - Input:Output	1:2
Voltage - Load	2.7V~5.5V
Driver Number of Bits	2
Fault Protection	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Output Peak Current Limit-Nom	1A
Rds On (Typ)	90m Ω
Built-in Protections	OVER CURRENT; THERMAL
Output Current Flow Direction	SINK
Height Seated (Max)	1.1mm
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2012
JESD-609 Code	e3
Feature	Status Flag
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Peripheral Drivers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	AP2176

AP2176MPG-13 Overview

Tape & Reel (TR) is how it's packaged.It's included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.The mounting type of the LED driver is Surface Mount.USB Switch is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 2 outputs that are available for use.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage of this LED driver is P-Channel volts.Currently, the LED driving board is equipped with Status Flag features.It is part of the AP2176 family of LED drivers.A total of 8 terminations have been recorded.For operation, we use the 8 pins.As far as the lighting driver is concerned, there are 1 functions.This operation requires the maximum output current to be decreased to 1A.High efficiency is possible at 3.3V supply voltage.The lighting driver is mounted in the way of Surface Mount.A total of 8 pins are included in this LED driver.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).This part is powered by 3/5V.