AP2181DM8G-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2181 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 95m Ω |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2181DM8G-13 Overview
Tape & Reel (TR) is how it's packaged.It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package as well.The LED driver is mounted as Surface Mount.This switch is of type USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The LED driver has a total of 1 outputs.It uses a supply voltage of Not Required to operate.A maximum output voltage of P-Channel volts has been specified.There are Load Discharge, Status Flag features available on the LED driving board.I believe it belongs to the AP2181 family.It consists of 8 terminations in total.During operation, the 8 pins are used.Currently, the lighting driver has a total of 1 functions.The maximum output current must drop to 1.5A to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.This lighting driver is mounted in the way of Surface Mount.8 pins are equipped with it.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 2.7V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.
AP2181DM8G-13 Features
Supplied from 5V
1 channels
AP2181DM8G-13 Applications
There are a lot of Diodes Incorporated AP2181DM8G-13 Power Switches ICs applications.
- Low Voltage I/O System Power
- Hot Swaps
- Storage Drives
- USB Protection
- Set-top-box
- Handheld Devices
- Wireless Headsets
- Portable GPS Device
- Wireless Modem Data Cards
- Various applications equipped with buttons
