AP2182AFGEG-7
| Parameters | |
|---|---|
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 125mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2182A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Height Seated (Max) | 0.63mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| JESD-609 Code | e4 |
AP2182AFGEG-7 Overview
Cut Tape (CT) is the way it's packaged.In the 8-UDFN Exposed Pad package, it is included.The lighting driver is mounted in the Surface Mount position.This switch is of type USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.It produces a maximum output voltage of P-Channel volts at its maximum output.In terms of features, the LED driving board has Load Discharge, Status Flag.There is a AP2182A family of things that it belongs to.A total of 8 terminations have been found in it.8 pins are used for operation.The LED driving board has a total of 1 functions.The maximum output current is reduced to 1.5A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.The lighting driver is mounted in the direction of Surface Mount.This LED driver is equipped with a total of 8 pins.125mOhm is the resistance of the lighting driver.A maximum supply voltage of 5.5V is set in Vsup.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 2 channels available.
AP2182AFGEG-7 Features
Supplied from 5V
Resistance of 125mOhm
2 channels
AP2182AFGEG-7 Applications
There are a lot of Diodes Incorporated AP2182AFGEG-7 Power Switches ICs applications.
- Wireless Modem Data Cards
- Portable Video Game Players
- HDD, SSD
- Handheld Devices
- Notebook and Tablet Computers
- Hot Swap
- Low Voltage I/O System Power
- USB Ports/Hubs
- Hot Swaps
- Portable Devices
