AP2182AMPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 125mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2182A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2182AMPG-13 Overview
Cut Tape (CT) is how it's packaged.In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, it is included.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of USB Switch.To ensure reliable operation, set the temperature to -40°C~85°C TA.By default, it is set to output 2.A supply voltage of Not Required is required for it to operate.The maximum output voltage of this LED driver is P-Channel volts.It is equipped with Load Discharge, Status Flag features.It is a member of the AP2182A family.There are 8 terminations in it.8 pins are used for operation.It has 1 functions.Maximum output current falls to 1.5A when operation criteria are met.High efficiency is possible at 5V supply voltage.It is positioned in the direction of Surface Mount.There are 8 pins in total on this board.125mOhm resistance is present in the lighting driver.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.In total, 2 channels are available.
AP2182AMPG-13 Features
Supplied from 5V
Resistance of 125mOhm
2 channels
AP2182AMPG-13 Applications
There are a lot of Diodes Incorporated AP2182AMPG-13 Power Switches ICs applications.
- Portable/Handheld Devices
- Handheld Devices
- PC Card Hot Swap
- Wireless Headsets
- Smartphone and PDA
- Notebook and Tablet Computers
- Hot Swap
- Smart Phones, Feature Phones
- Portable GPS Device
- Portable Devices
