AP2182MPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 150MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 2.1A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2182 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 50 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 115m Ω |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2182MPG-13 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a package for it in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.In this case, the LED driving board is mounted as Surface Mount.The switch type is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 2 outputs.The LED driving board operates with a supply voltage of Not Required.Voltage output is P-Channel volts at maximum.There are Status Flag features available on the LED driving board.This object belongs to the AP2182 family.As a result, there are 8 terminations.For operation, we use the 8 pins.Currently, there are 2 functions associated with the lighting driver.Maximum output current falls to 1.5A when operation criteria are met.Using a voltage of 5V allows for high efficiency.Surface Mount is mounted in the way.This LED driver is equipped with a total of 8 pins.There is 150MOhm resistance on the LED driver.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).In this case, the power supply is 3/5V.
AP2182MPG-13 Features
Supplied from 5V
Resistance of 150MOhm
AP2182MPG-13 Applications
There are a lot of Diodes Incorporated AP2182MPG-13 Power Switches ICs applications.
- Notebook PC
- Mobile Communication Devices
- Hard Disk Drives
- Portable Devices
- USB3.1 Power Delivery
- Portable/Handheld Devices
- Set-Top Boxes
- Storage (HDDs, SSDs)
- HDD and SSD
- Various applications equipped with buttons
