AP2182SG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 160MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Current Rating | 2.1A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2182 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 50 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 120m Ω |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2182SG-13 Overview
The package is in the form of a Tape & Reel (TR).This file is included in package 8-SOIC (0.154, 3.90mm Width).The lighting driver is mounted in the Surface Mount position.It owns USB Switch switch type.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 2 outputs.To operate, it needs a supply voltage of Not Required.Voltage output is P-Channel volts at maximum.There are Status Flag features available on the LED driving board.It belongs to the family AP2182.In total, there are 8 terminations.The 8 pins are used for the operation of the system.Currently, the lighting driver has a total of 2 functions.The maximum output current drops to 1.5A in order to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.This lighting driver is mounted in the way of Surface Mount.The LED driver has a total of 8 pins.160MOhm resistance is present in the lighting driver.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The Vsup value (maximum supply voltage) is set to 5.5V.This part has a power supply of 3/5V volts.
AP2182SG-13 Features
Supplied from 5V
Resistance of 160MOhm
AP2182SG-13 Applications
There are a lot of Diodes Incorporated AP2182SG-13 Power Switches ICs applications.
- Portable/Handheld Devices
- Portable GPS Device
- Low Voltage I/O System Power
- Portable GPS
- Telecom and Network Systems
- Notebook and Tablet Computers
- Hot Swaps
- HDD and SSD
- USB3.1 Power Delivery
- Smart Phones, Feature Phones
