AP2186MPG-13
| Parameters | |
|---|---|
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2186 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
AP2186MPG-13 Overview
The package is in the form of a Tape & Reel (TR).Package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad contains it.In this case, the LED driving board is mounted as Surface Mount.The switch type is USB Switch.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 2 outputs.Operation is based on Not Required supply voltage.The maximum output voltage of this LED driver is P-Channel volts.As far as features are concerned, the LED driving board has Status Flag.The AP2186 family contains this object.In total, there are 8 terminations.The 8 pins are used for the operation of the system.Currently, the lighting driver has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1.5A.With a supply voltage of 3.3V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.As a result, it has a total of 8 pins.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The maximum supply voltage is set to 5.5V.There is a voltage supply of 3/5V volts on this part.
AP2186MPG-13 Features
Supplied from 3.3V
AP2186MPG-13 Applications
There are a lot of Diodes Incorporated AP2186MPG-13 Power Switches ICs applications.
- Telecom and Network Systems
- PC Cards
- Storage (HDDs, SSDs)
- Smartphone and PDA
- Portable GPS Device
- Hot Swap
- Solid-State Drives
- Hot-Swap Systems
- Solid State Drivers
- Hard Disk Drives
