AP2191DFMG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2191 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 90m Ω |
| Height Seated (Max) | 0.53mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2191DFMG-7 Overview
Tape & Reel (TR) is the way it's packaged.The 6-UFDFN Exposed Pad package includes it.A Surface Mount mounting is used for the LED driving board.USB Switch is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.The LED driving board is powered by a voltage of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.A lighting driver with Load Discharge, Status Flag features is available.I believe it belongs to the AP2191 family.A total of 6 terminations have been recorded.6 pins are used for operation.It is important to note that the LED driving board has 1 functions.This results in the maximum output current dropping to 1.5A to meet the operation criteria.The supply voltage of 5V is conducive to high efficiency.In this case, it is mounted in the way of Surface Mount.A total of 6 pins are included in this LED driver.The Vsup value (maximum supply voltage) is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels to choose from.
AP2191DFMG-7 Features
Supplied from 5V
1 channels
AP2191DFMG-7 Applications
There are a lot of Diodes Incorporated AP2191DFMG-7 Power Switches ICs applications.
- Portable/Handheld Devices
- Hard Disk Drives
- USB Ports/Hubs
- Wearable Devices
- Hot Swap
- USB Power Distribution
- Telecom and Network Systems
- Wireless Modem Data Cards
- USB Protection
- Solid-State Drives
