AP2191DMPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2191 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 95m Ω |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2191DMPG-13 Overview
Tape & Reel (TR) is how it's packaged.This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.This lighting drivere has a mounting type of Surface Mount.The switch type is USB Switch.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates at Not Required volts.It has a maximum output voltage of P-Channel volts.Load Discharge, Status Flag features are available on the lighting driver.There is a AP2191 family of things that it belongs to.A total of 8 terminations can be found in it.8 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.The maximum output current drops to 1.5A in order to meet the operation criteria.A supply voltage of 5V leads to high efficiency.The lighting driver is mounted in the way of Surface Mount.A total of 8 pins are present on it.The maximum supply voltage for this LED driver is 5.5V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 2.7V.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 available channels.
AP2191DMPG-13 Features
Supplied from 5V
1 channels
AP2191DMPG-13 Applications
There are a lot of Diodes Incorporated AP2191DMPG-13 Power Switches ICs applications.
- Set-Top Boxes
- Portable GPS
- Portable/Handheld Devices
- Smart Phones, Feature Phones
- Gaming
- Portable Devices
- PC Cards
- Handheld Devices
- Portable Music Players
- Solid State Drivers
