AP2191DSG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 95m Ω |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2191DSG-13 Overview
It is package in Tape & Reel (TR) case.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.The mounting type of the LED driver is Surface Mount.The switch type of this switch is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 1.A voltage of Not Required is used to power it.It produces a maximum output voltage of P-Channel volts at its maximum output.The lighting driver has Load Discharge, Status Flag features.There are 8 terminations in it.The 8 pins are used to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.As a result, the maximum output current is reduced to 1.5A in order to meet the operation requirements.High efficiency is possible at 5V supply voltage.As a result, it is mounted in the manner of Surface Mount.As a result, it has a total of 8 pins.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 2.7V.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.The total number of channels is 1.
AP2191DSG-13 Features
Supplied from 5V
1 channels
AP2191DSG-13 Applications
There are a lot of Diodes Incorporated AP2191DSG-13 Power Switches ICs applications.
- Gaming
- Low Voltage I/O System Power
- USB Power Distribution
- Portable/Handheld Devices
- Telecom and Network Systems
- Solid-State Drives
- Portable Devices
- HDD, SSD
- Various applications equipped with buttons
- Wireless Modem Data Cards
