AP2191FMG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2191 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
AP2191FMG-7 Overview
The package is in the form of a Tape & Reel (TR).This package is included in 6-UFDFN Exposed Pad.A Surface Mount mounting is used for the LED driving board.The switch type is USB Switch.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver is equipped with 1 outputs.The LED driving board operates at Not Required volts.Voltage output is P-Channel volts at maximum.It has a total of Status Flag features.As you can see, it comes from the AP2191 family.In total, there are 6 terminations.The 6 pins are used to operate the LED driver.It is important to note that the LED driving board has 1 functions.To meet the operation criteria, the maximum output current drops to 1.5A.Using a voltage of 5V allows for high efficiency.It is positioned in the direction of Surface Mount.As a result, it has a total of 6 pins.110mOhm is the resistance of the lighting driver.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).Normal operation requires a voltage above 2.7V for the supply voltage.It has a power supply of 3/5V.
AP2191FMG-7 Features
Supplied from 5V
Resistance of 110mOhm
AP2191FMG-7 Applications
There are a lot of Diodes Incorporated AP2191FMG-7 Power Switches ICs applications.
- Telecom and Network Systems
- Portable GPS Device
- HDD, SSD
- PC Cards
- Hot-Swap Systems
- Wireless Headsets
- Wearable Devices
- Mobile Communication Devices
- Set-Top Boxes
- Solid State Drivers
