AP2191MPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 2.1A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 95m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2191MPG-13 Overview
It is packaged in the form of a Tape & Reel (TR).This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.This switch is of type USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver has 1 outputs.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of P-Channel volts.There are Status Flag features available on the LED driving board.It consists of 8 terminations in total.The operation is carried out using the 8 pins.Currently, there are 1 functions associated with the lighting driver.This results in the maximum output current dropping to 1.5A to meet the operation criteria.High efficiency is possible at 5V supply voltage.The lighting driver is mounted in the way of Surface Mount.8 pins are equipped with it.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The Vsup value (maximum supply voltage) is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must be maintained above 2.7V.3/5V is the power supply of the part.
AP2191MPG-13 Features
Supplied from 5V
AP2191MPG-13 Applications
There are a lot of Diodes Incorporated AP2191MPG-13 Power Switches ICs applications.
- Portable GPS
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers
- USB Protection
- PC Card Hot Swap
- USB Ports/Hubs
- Various applications equipped with buttons
- Notebook PC
- USB Power Distribution
- Gaming
