AP2191WG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 115mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 2.1A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2191 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 95m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2191WG-7 Overview
It is packaged in the manner of a Tape & Reel (TR).It is included in the package SC-74A, SOT-753.The lighting driver is mounted in the Surface Mount position.A USB Switch switch type is owned by it.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of P-Channel volts can be obtained with this LED driver.A lighting driver with Status Flag features is available.I believe it belongs to the AP2191 family.A total of 5 terminations can be found in it.The operation is performed through the 5 pins.It is important to note that the LED driving board has 1 functions.The maximum output current drops to 1.5A in order to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.Surface Mount is mounted in the way.A total of 5 pins are present on it.There is 115mOhm resistance on the LED driver.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.A maximum input voltage of 5.5V volts can be applied to it.It requires 2.7V volts as the minimum input voltage.
AP2191WG-7 Features
Supplied from 5V
Resistance of 115mOhm
AP2191WG-7 Applications
There are a lot of Diodes Incorporated AP2191WG-7 Power Switches ICs applications.
- Solid-State Drives
- Notebook PC
- HDD and SSD
- Storage Drives
- Notebook and Tablet Computers
- USB Power Distribution
- Gaming
- Various applications equipped with buttons
- USB Power Distribution
- Wireless/Networking Cards
